Dr. Pulley Variator Roller Weight Set 19x15 (Aprilia, Piaggio, Vespa 50)
Description: Dr. Pulley 16x13mm Variator Roller Weight Set for Aprilia, Piaggio 50, Vespa 2-stroke engines. Dr. Pulley Roller Weights are the latest roller weights to hit the market and the most advanced weights available. These variator rollers perform up to 20% better than standard round weights and last up to 18% longer with 22% less performance material loss. The weights have several unique features such as their composite material being nylon for faster performance.
Dr. Pulley Variator Roller Weights means better performance from your scooter no matter what stage you are in upgrading your scooter. Simply add 6-gram or 7-gram weights and a CVT Kit, and a new belt for a powerful upgrade. The larger weight size will add the top end only when you are doing other upgrades to make up for the loss of bottom or take-off. The same is true for lighter weights, if you go too light you will need to make up for the loss on the top end. 40/50cc scooters we have found do best with 6-gram or 7-gram weights, use 6-gram for over 200lbs. 7-gram under 200lbs. Add the Dr. Pulley variator to complete your upgrade.
Installation: Make sure variator drive face is seated properly and not get its teeth chewed by the Bendix: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
NOTE: Please select weight from the menu.
• Broadens your range of gear ratios
• Fastest Roller Weights available
• High-Temperature Resistance
• Increases acceleration and re-acceleration properties
• Increases top-end speed
• Lasts longer than standard roller weights
• Low Friction Coefficient (low wear)
• No abrasive fibers (glass fiber or carbon fiber)
• Suitable for aluminum variator housing
• 6x Roller Weights: 19x15mm 3gm<10gm
• U.S. Patent Number: 7,276,004
• Material: SL-9T, SL-9TS (oil-less PA46)
• Made in Taiwan
• Fit Aprilia 49/50cc
• Fit Piaggio 49/50cc
• Fit Vespa 49/50cc
Supported Models: Aprilia SR50 Di-Tech LC (2003-13), Aprilia SR50 R Factory Di-Tech LC (2003-13), Gilera Runner 50 Purejet (2005+), Piaggio NRG 50 Purejet LC (2005+), Vespa ET2, Various unlisted makes/models
Item Weight & Package Dimensions:
• 0.006~0.022 pounds | 3.486" (L) x 2.852" (W) x 1.050" (H)