Dr. Pulley Variator Slide Set (Majesty, Morphous, Tmax)

Description: Dr. Pulley Variator Slide Set for the Yamaha Majesty 400, Yamaha T Max 500 & Yamaha Morphous. The slide pieces in the variator are equally as important as the rollers. It is highly recommended to change the slide pieces to coincide with the rollers. The Dr. Pulley Variator Slides are made of the same abrasion-resistant nylon as the Dr. Pulley Roller Weights, which promises a long life.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

•    4x Plastic Slides
•    Made in Taiwan
•    Fit Majesty 400
•    Fit Morphous 250
•    Fit Tmax 500

Supported Models: Yamaha Majesty, Yamaha Morphous 250, Yamaha Tmax 500, and various unlisted makes/models.

-----
Item Weight & Package Dimensions:
•    0.005 pounds | 2" (L) x 1.5" (W) x 0.2" (H)