Main Menu
Your Cart

Dr. Pulley Variator Sliding Weight Set 25x17 (Aprilia, Piaggio 400)

Dr. Pulley Variator Sliding Weight Set 25x17 (Aprilia, Piaggio 400)

Description: Dr. Pulley 25x17mm Sliding Weights for the Aprilia, Piaggio 400/500cc 4-stroke engines. Traditionally, the gear ratio is changed by the up-and-down rolling movement of the rolling weights in the ramp of the Moveable Drive Pulley (MDF). Now the innovative Dr. Pulley Sliding Weights slide up-and-down the ramp to change the gear ratio. This unique sliding movement (not rolling) provides exclusive advantages to increase CVT performance. With Dr. Pulley, no abnormal wear will occur even when running in high gear. Dr. Pulley's U.S. Patent Number 7,276,004 states that their sliding roller weights eliminate abnormal wear, prevent reduction gear ratio deterioration, prolong the useful life of the transmission, and have the availability to adjust reduction gear ratios as well as driving performance. At the same time, Dr. Pulley Sliding Weights are also adapted to compensate for wear automatically, to adjust by itself to move further outward in a movable drive pulley half, and to make the vehicle reach a higher maximum vehicle speed.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

NOTE: Please select weight from the menu

Features:

•    Broadens your range of gear ratios
•    Fastest Sliding Weights available
•    High-Temperature Resistance
•    Increases acceleration and re-acceleration properties
•    Increases top-end speed
•    Lasts longer than standard roller weights
•    Low Friction Coefficient (low wear)
•    No abrasive fibers (glass fiber or carbon fiber)
•    Suitable for aluminum variator housing

Specifications:

•    6x Sliding Weights: 25x17mm 13gm<19gm
•    U.S. Patent Number: 7,276,004
•    Material: SL-9T, SL-9TS (oil-less PA46)
•    Made in Taiwan
•    Fit Aprilla 400/500cc
•    Fit Piaggio 400/500cc

Supported Models: Aprilia Atlantic Sprint 400/500 ('05-'08), Aprilia Scarabeo Light 400/500 ('06-'08), Aprilia Scarabeo 500 ('07-), Piaggio Beverly 400 ('06-'07), Piaggio Beverly Tourer 400 ('08-'09), Piaggio Beverly 500 ('05-'08), Piaggio Beverly Cruiser 500 ('07-'09), Piaggio MP3 400 ('00-'08), Piaggio MP3 LT 400 (2009), Piaggio MP3 Mic 400 ('08-'09), Piaggio MP3 500, Piaggio X Evo 400 ('07-'09), Piaggio X8 400 ('06-'08), Piaggio X9 Evolution ABS 500 ('06-'07) and various unlisted makes/models.

-----
Item Weight & Package Dimensions:
•    0.028~0.041 pounds | 3.486" (L) x 2.852" (W) x 1.050" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Dr. Pulley Variator Sliding Weight Set 25x17 (Aprilia, Piaggio 400)
  • Stock: 40
  • Reward Points: 2
  • Part #: 169-365
Sold: 0
Views: 2115
$49.95
Ex Tax: $49.95
Price in reward points: 50

Included