Dr. Pulley Variator Roller Weight Set 21x15 (Vespa GT)
Description: Dr. Pulley 21x15mm Sliding Roller Weights for Vespa GT, Vespa GTS, and Vespa GTV scooter. Traditionally, the gear ratio is changed by the up-and-down rolling movement of the roller weights in the ramp of the Moveable Drive Pulley (MDF). With Dr. Pulley, no abnormal wear will occur even when running in high gear. Dr. Pulley's U.S. Patent Number 7,276,004 states that their roller weights eliminate abnormal wear, prevent reduction gear ratio deterioration, prolong the useful life of the transmission, and have the availability to adjust reduction gear ratios as well as driving performance. Dr. Pulley Round Roller Weights have exceptional durability, heat resistance and are low friction and low wear.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.NOTE: Please select weight from the menu
Features:
• Broadens your range of gear ratios
• Fastest Roller Weights available
• High-Temperature Resistance
• Increases acceleration and re-acceleration properties
• Increases top-end speed
• Lasts longer than standard roller weights
• Low Friction Coefficient (low wear)
• No abrasive fibers (glass fiber or carbon fiber)
• Suitable for aluminum variator housing
Specifications:
• 6x Roller Weights: 21x15mm 11gm<22gm
• U.S. Patent Number: 7,276,004
• Material: SL-9T, SL-9TS (oil-less PA46)
• Made in Taiwan
• Fit GT 200cc
• Fit GTS 250/300cc
• Fit GTV 300cc
Supported Models: Piaggio, Vespa GT 200, Vespa GTS 250/300, Vespa GTS 300
-----
Item Weight & Package Dimensions:
• 0.024~0.048 pounds | 3.486" (L) x 2.852" (W) x 1.050" (H)