Main Menu
Your Cart

NCY Throttle Grip 7/8in Open-End Black Set (GY6, Ruckus, Universal)

NCY Throttle Grip 7/8in Open-End Black Set (GY6, Ruckus, Universal)

Description: NCY Throttle Grip Rubber Open-End Black Set fit universal 7/8" handlebar. 120mm grip pair for standard 7/8 or 22mm bars with a cam-type throttle tube. Grips have open ends for that clean cut and ready for bar-end connections.

NOTE: If throttle cable becomes dry (non-lube). Recommend use lubricating grease, oil, or WD-40 before use. This also helps ease cable friction wear and tear in throttle cable's sleeves, use lubricating tools to help grease where inner throttle sleeve and cable inside line ONLY.

Recommended use hairspray to help ease of rubber grip set slide onto the handlebar left-side and onto the throttle sleeve right-side. Hairspray will allow it to tack dray in minutes, thus allowing grip usage after 10-15 minutes applied. Or if available use an air-compressor wedge open a tiny air pocket in front of the rubber grip while pressing from behind grip to slide onto or off the handlebar and onto or off the throttle sleeve without the use of chemicals.

Specifications:

Include the following handlebar grip set.

•    1x Lt Grip Open-End L: 121.2mm (4.7") / ID: 21.2mm / OD: 35<48.56mm
•    1x Rt Grip Open-End L: 117.5mm (4.6") / ID: 31mm / OD: 36.2<51.4mm
•    Color: Black
•    Made in Taiwan
•    Fit Handlebar OD: 22mm (7/8”)
•    Fit GY6 125/150cc+
•    Fit QMB 49/50cc+
•    Fit GET 49/50cc+

Supported Models: 139QMB, GY6, Honda Ruckus, Zuma, Rattler, and virtually any other scooter with these handlebar 7/8” measurements.

-----
Item Weight & Package Dimensions:
•    0.345 pounds | 7.5" (L) x 5.5" (W) x 2.3" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
NCY Throttle Grip 7/8in Open-End Black Set (GY6, Ruckus, Universal)
  • Stock: 40
  • Part #: 0800-1037
Sold: 0
Views: 2894
$13.00
Ex Tax: $13.00
Price in reward points: 13

Included