Main Menu
Your Cart

Naraku Variator Boss Shim 20mm Set (DIO, GET, QMB)

Naraku Variator Boss Shim 20mm Set (DIO, GET, QMB)

Description: Naraku Variator Boss 20mm Shim Set for 139QMB 49/50cc 4-stroke engine. Variator control shims can be installed between the drive faces to lengthen the boss if your variator does not open fully to allow maximum belt travel. Also fits stock variators on Honda Ruckus and Metropolitan and 2-stroke Honda Elite SA/SR 50, Kymco ZX50/Super 8/Super 9, and SYM DD50.

Specifications:

Include the following Boss shim set.

•    10x Variator Boss Shim ID: 14mm / OD: 20mm / Thick 0.1mm
•    10x Variator Boss Shim ID: 14mm / OD: 20mm / Thick 0.2mm  
•    10x Variator Boss Shim ID: 14mm / OD: 20mm / Thick 0.5mm
•    Made in Taiwan
•    Fit Variator Housing: 88mm89mm or 95mm Weights: 16x13mm / Slides: 3 / Boss: 20mm
    Fit Variator Shaft Nut: M12 / Washer: M12 / Socket: 17mm
•    Fit Belt Size: 654669-18-30 (Fit DIO ONLY)
•    Fit Belt Size: 660-18-28 (Fit Metro ONLY)
•    Fit Belt Size: 785-18-30 (Fit Ruckus ONLY)
•    Fit Belt Size: 669, 729, 788-18-30 (Fit QMB ONLY)
•    Fit Dowel Pin Set (8x10mm)
•    Fit DIO 49/90cc+
•    Fit GET 49/50cc
•    Fit QMB 49/50cc+

Supported Models: Naraku CVT Kit (Part# KIT.A.139QMB); Honda Dio AF16 AF18E 50; Elite S/SE/SR 1994-2001, Daelim Cordi 50, Kymco Fever/ZX50, SYM DD50, GY6 40QMB 50cc 2-stroke, 139QMB 49cc-50cc 4-stroke, 50QMF 90cc-100cc, GY6 139QMB 49cc-50cc engines, Buddy50, Filly 50, Kymco, QLink, Peugeot, Piaggio, RoughHouse, SYM, TaoTao, and virtually any scooter engine with these measurements.

-----
Item Weight & Product Dimensions:
•    0.02 pounds | 0.787" (OD) x 0.551" (ID) x 0.314" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Naraku Variator Boss Shim 20mm Set (DIO, GET, QMB)
  • Stock: 37
  • Part #: NK800.07
Sold: 29
Views: 3612
$6.95
Ex Tax: $6.95
Price in reward points: 7

Included