NCY Front End Slammed Disc Conversion Kit (Honda Ruckus)

Description: NCY Front End Slammed Disc Conversion Kit for the Honda Ruckus that doesn't contain rims and forks. Sold separately disc-style forks available in the following colors: Silver (Part# 1000-1364), Black (Part# 1000-1336), and Titanium Gray (Part# 1000-1363).

NOTE: NCY Front End Slammed Disc Conversion Kit WILL REQUIRE disc-style as mention above.

Specifications:

100% NCY Products – NO SUBSTITUTE.

Includes the following Axle, Brake Assembly, Cables, Bolts, and Wire accessories.

1.    Includes NCY Brake Disc 200mm
•    1x Disc Diameter: 200mm (7.874in)
•    Disc Material: Stainless Steel
•    Disc Design: Floated (two-piece)
•    Color: Gunmetal
2.    Includes NCY Brake Disc M8 Bolt Set
•    3x Disc Allen Bolts: M8x26mm / OD: 15.85mm 
•    Material: Stainless Titanium
•    Color: Electroplated
3.    Includes NCY Front Axle 12mm x 250mm
•    1x Front Rim Axle L: 250mm / D: 12mm / Provision Pin Holes: 2mm
•    2x Electroplated Nuts ID: 12x1.25mm / OD: 17mm / H: 11.84mm
•    Nut Smooth Base Surface ID: 12mm / OD: 24.9mm
•    Material: Stainless Titanium
4.    Includes NCY Brake Caliper Adapter 200mm B4
•    1x Caliper Adaptor L: mm / W: mm / H: mm
•    Fork Mount Hole-to-Hole L: mm ( in) / ID: 8mm
•    Disc Brake Mount Hole-to-Hole L: mm / ID: 8mm
•    Color: Black
5.    Includes NCY Brake Caliper 4 Piston
•    1x Brembo-Style Four Piston Caliper L: mm / W: mm / H: mm
•    1x Bleeder Bolt w/Rubber Cap: M8
•    2x Brake Pads (each) L: 70mm / W: 42.5mm / Thick: 0.326mm
•    Color: Black
6.    Includes NCY Brake Line Front 110cm Stainless
•    1x Hi-Pressure Braided Brake Line (black) L: 110cm (43.3”) / OD: 7.77mm
•    4x Copper Crush Washers OD: 14.14mm / ID: 10.1mm / Thick: 1mm
•    1x Rubber Grommet (black) L: 22mm / ID: 8mm / OD: 14<20.28mm
•    2x Stainless Steel Banjo Bolts (blue)
•    2x Rubber Fitting Covers (red)
7.    Includes NCY Brake Bleeder Valve Set
•    2x Aluminum Bleeder Valve Casings (blue) L: 32.5mm / Hex OD: M10x1.25mm
•    2x Stainless Steel Bleeder Valves (gold) L: 25.3mm / Hex OD: M8x1.25mm
•    2x Rubberized Bleeder Valve Caps OD: 12mm / ID: 5.37mm / H: 8.3mm  
•    4x Copper Crush Washers OD: 15.78 / ID: 10.37mm / Thick: 0.83mm
8.    Includes NCY Brake Lever, Switch, Master Cylinder
•    1x Brake Lever L: 168mm / W: 5<35.77mm / Hole ID: 8mm / H: 8.3<26.54mm
•    Material: CNC Aluminum Alloy
•    Control: Front Disk Brake
•    1x Momentary Brake Sensor Switch
•    1x Wire Harness: 2-Wire Connectors
•    Switch Type: Momentary Toggle
•    1x Brake Master Cylinder L: 113mm / W: 74mm / H: 77mm
•    1x Banjo Bolt: M12x10mm / L: 29.3mm
•    2x Washers OD: 14.9mm / Rubber ID: 10mm / Thick: 2.85mm
•    2x Hex Bolts: M8
•    Color: Black
9.    Includes NCY Speedometer Cable, Gear 
•    1x Speedometer Cable L: 86.6cm (34.1”) / OD: 7<14.3mm / Weight: 170gm
•    1x Speedometer Gear L: 64.5mm / W: 32.72mm / H: 50.37mm
•    Weight: 113gm / Axle Hole ID: 12mm
•    Color: Black
10.  Includes NCY Start Button w/Wire
•    1x Start Button w/2-Wire Connectors
•    Switch Type: Momentary Toggle
•    1x Clamp w/Phillip Screw +Nut
•    Color: Black
•    Made in Taiwan
•    Fit Ruckus

Supported Models: Honda Ruckus, and virtually any other scooter with these measurements.

-----
Item Weight & Package Dimensions:
•  5.312 Pounds | 17.4" (L) x 14" (W) x 3.9" (H)