Main Menu
Your Cart

NCY Variator 95mm Coated Gold (Metro, Ruckus GET)

NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)

Description: NCY Variator for Metropolitan 2012 & older and all U.S. Honda Ruckus GET transmission! This beauty is lighter than any other coated pulley variator on the market weight at 17.5oz and a 95mm outer diameter drive face is ideal for all types of riding. The teflon coated roller tracks prevent debris accumulation that causes roller weights to a flat spot, leading to extended roller weight life and consistently smooth transitions.

NOTE: Recommend using a new belt with this kit. Belt and the belt drive-facing plates KEEP DRY. All, other areas apply moly-graphite grease when assembling.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Include the following Variator housing.

•    1x Alumin-Alloy Housing Teflon Coated ID: 20mm / OD: 95mm / H: 31mm
•    Made in Taiwan
    Fit Lock: Bracket
•    Fit Variator Weights: 16x13mm / Slides: 3 Boss: 20mm / Shims: 20mm / Drive Spline: 26
    Fit Variator Shaft Nut: M12 / Washer: M12 / Socket: 17mm
•    Fit Belt Size: 660-18-28 (Fit Metro ONLY)
•    Fit Belt Size: 785-18-30 (Fit Ruckus ONLY)
•    Fit Dowel Pin Set (8x10mm)
•    Fit GET 49/50cc

Supported Models: NCY CVT Kit (Part# 1200-1220); Metropolitan GET 2012 & older, Honda Ruckus GET all U.S. Model, Honda Zoomer NPS50, and virtually any scooter engine with these measurements.

-----
Item Weight & Product Dimensions:
•    0.388 pounds | 3.505" (OD) x 3.202" (ID) x 1.288" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
NCY Variator 95mm Coated Gold (Metro, Ruckus GET)
  • Stock: 40
  • Reward Points: 1
  • Part #: 1200-1154
Sold: 19
Views: 5525
$38.00
Ex Tax: $38.00
Price in reward points: 38

Included