RH Air Intake Tube w/Uni Filter Kit (Metro, Ruckus)
Description: RuckHouse Air Intake Tube w/Uni Filter Kit. Everything you need to eliminate your stock Honda Ruckus and Honda Metropolitan airbox with the most straight air-filter. When you remove your stock airbox you will need to re-jet the carburetor. We recommend you add a performance exhaust at the same time so you are only tuning your carburetor once.
NOTE: Some tuning required. Jetting may vary depending on altitude, climate, exhaust, type of gas, & other mods. These are the main parts you may need to increase or lower 1 or both of your jet sizes.Specifications:
Includes the following Intake tube, Carburetor jets, Needle shim, Air filter, Breather filter, and Clamps.
• 1x Intake Rubber Tube w/PVC Fitting L: 209.55mm / ID: 33.45<37.25mm / OD: 41<48mm
• 1x Uni Straight Foam Filter L: 102>117mm / ID: 38mm / OD: 49mm (UP-4152ST)
• 1x Stainless Steel Clamp-On w/UNI Mesh Breather Filter 1/2" (UP-103)
• 2x Stainless Steel Camp OD: 25<51mm / Clamp OD: 35<60mm
• 1x Main Jet Size: 85 RPM
• 1x Idle Jet Size: 38 RPM
• 1x Needle Shim (washer) ID: 2.6mm / OD: 6mm / H: 0.63mm
• Made in the U.S.A.
• Fit GET 49/50cc
Supported Models: Metropolitan GET 2012 & older, Honda Ruckus GET all U.S. Model, and virtually any scooter engine with these measurements.
Item Weight & Package Dimensions:
• 0.806 pounds | 12.5" (L) x 7.75" (W) x 3.5" (H)