Main Menu
Your Cart

Stage6 Clutch Bell R/T Type 433 107mm CNC 5-Spokes (Aprilia, JOG, Zuma 50)

Stage6 Clutch Bell R/T Type 433 107mm CNC 5-Spokes (Aprilia, JOG, Zuma 50)

Description: Stage6 Clutch Bell R/T Type 433 107mm CNC 5-Spokes for Aprilia, JOG, Zuma 50, and many other 50cc base engines. Being CNC-manufactured from one piece, this clutch bell has a very high precision, which raises this part over its conventional, pressed colleagues. The Stage6 R/T CNC Clutch Bells are available in three versions that vary in design and weight; thus it is now possible to influence torque and engine characteristics through the choice of the clutch bell. The designation on the bell (433, 450 or 479) shows the weight in gramme with a tolerance of 3 gramme. The cooling ring has been turned into the part instead of simply shrunk onto it, as it is the case with conventional versions. Thanks to the three bores in the cooling jacket, you can now adjust the clutch engagement of Stage6 Torque Control MK I/II without having to remove the bell. Two indentures in the cooling ring give grip to lock the bell with the Stage6 clutch bell tool (optionally available) and undo the screw.

Installation: Make sure variator drive face is seated properly and does not get its teeth chewed by the Bendix: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Include the following Clutch Bell.

•    Clutch Bell (5-Spokes) Vented ID: 107mm / OD: 114.7mm / H: 34.6mm
•    Splines: 22 / ID: 11<12mm / OD: 16.95mm / H: 17.75mm
•    Made in Italy
•    Fit Aprilia 50
•    
Fit JOG 50
•    Fit Zuma 50

Supported Models: Aprilia Amico 50, Aprilia Area 51, Aprilia Gulliver 50 AC, Aprilia Rally 50 AC, Aprilia SR 50 AC, Aprilia Scarabeo 50, Aprilia Sonic 50 AC, Benelli 491 GT 50, Benelli 491 RR 50, Benelli 491 ST 50, Benelli 491 Sport 50, Benelli K2 50, Benelli Naked 50, Benelli Pepe 50, Beta Ark 50 AC, Beta Ark 50 LC, Beta Chrono 50, Beta Eikon 50, Beta Quadra 50, Beta Tempo 50, Buffalo Fox 50, Buffalo Rex 50, Buffalo Wind 50, Italjet Dragster 50, KTM Ark 50, Kreidler Florett 50, MBK Booster 50, MBK Flipper 50, F10 50 Jetline, Malaguti F12 Phantom 50 AC, Motobi Pesaro 50, Motowell Magnet RS 50, Rex (Jinan Qingqi) Escape 50, Streak Access 50, Yamaha Aerox 50, Yamaha BWS 50, Yamaha Jog 50, Yamaha Zuma 50 and virtually any other scooter engine with these measurements.

-----
Item Weight & Product Dimensions:
•    0.737 Pounds | 4.515" (OD) x 4.212" (ID) x 1.362" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Stage6 Clutch Bell R/T Type 433 107mm CNC 5-Spokes (Aprilia, JOG, Zuma 50)
  • Stock: 39
  • Reward Points: 4
  • Part #: S6-5516614
Sold: 1
Views: 246
$111.95
Ex Tax: $111.95
Price in reward points: 112

Included