Stage6 Crankshaft R/T 44mm Stroke 90mm Conrod (Aprilia, Piaggio, Vespa 50)
Description: Stage6 Crankshaft R/T 44mm Stroke 90mm Conrod for Aprilia, Piaggio 50, Vespa 2-stroke engines. Now available: the 44 mm R/T long-stroke crankshaft from Stage6 in the optimized Pro-Flow design. Available with 90mm forged conrod. Just like the other R/T crankshafts, this one also has a reinforced 18 mm conrod journal, silver thrust washers, and high-quality Torrington silver cage bearing. Furthermore, the vario-side taper has been reinforced to 16 mm and can thus only be used with Stage6 Oversize, Malossi Overrange, or Polini Evo Vario with the respective vario hub. Included in the delivery are two conrod bearings to allow for mounting pistons with 12 mm or 13 mm pins. The crankshaft, therefore, makes it possible to use the large-displacement R/T cylinder and also provides a bargain alternative to Malossi's BigBore cylinders. Attention: For Piaggio engines, you will have to use a special oil seal to fit the vario-side taper (which has a diameter of 20 mm at this position). The seal is included in the kit!!!
NOTE: This does not include crank bearings, sold separately.
Temperature Modification May Be Required: You'll need to heat the aluminum crankcase area where the crankshaft bearing side will be placed, in order to fit immediately the freezing Polini Crankshaft bearing side. Users assume full responsibility and risk doing so using this Polini Crankshaft.
Specifications:
Includes the following Crankshaft and Wrist pin bearing.
• Overall Stroke: 44mm
• Wrist Pin: 12mm
• Full Circle Crank
• Made in Italy
• Fit Aprilia 49/50cc
• Fit Piaggio 49/50cc
• Fit Vespa 49/50cc
Supported Models: Aprilia Mojito, Aprilia Scarabeo 4T, Aprilia Sport City One, Aprilia Sr R Factory, Aprilia Sr Street, Piaggio Fly, Piaggio Typhoon, Piaggio Vespa, Various unlisted makes/models
-----
Item Weight & Package Dimensions:
• 3.33 pounds | 10.5" (L) x 5" (W) x 3.5" (H)