Main Menu
Your Cart

Stage6 Roller Shells Replacement 17x12 (AN125)

Stage6 Roller Shells Replacement 17x12 (AN125)

Description: Stage6 Roller Shells Replacement 17x12mm for Suzuki AN125, 124cc 4-stroke engines.

NOTE: You must install these weights in an alternating pattern, otherwise a severe imbalance in the variator will occur. These rollers are designed for tuning purposes only and we recommend that they are not used for long-term use. Once you have determined the appropriate weight for your set up you should buy a complete roller set for permanent use.

Installation: Make sure variator drive face is seated properly and not get its teeth chewed by the Bendix: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Include the following Shell replacement.

•    12x Wear-Resistant Plastic Shell Size: 17x12mm
•    Made in Italy
•    Fit AN125
•    Fit Aprilia 50

Supported Models: Aprilia SR50, Derbi Atlantis, Italjet, Malaguti Ciak 100cc, SR Di Tech, Suzuki AN125

-----
Item Weight & Product Dimensions:
•    0.5 pounds | 9.5" (L) x 6" (W) x 0.655" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Stage6 Roller Shells Replacement 17x12 (AN125)
  • Stock: 40
  • Part #: S6-GS17ET
Sold: 0
Views: 610
$7.95
Ex Tax: $7.95
Price in reward points: 8

Included