Taida Big Bore Combo 67mm 232cc C 2V w/Forged Piston Fit 57mm (GY6)

Description: High-Quality Taida Ceramic Cylinder 67mm 232cc with Forged Aluminum Piston offers better durability and reduced friction for GY6 205/232cc + engines. The forged piston will offer better power and the ceramic cylinder with more heat dissipation will help to avoid overheating. The ceramic cylinder coating offers better durability with more heat dissipation and can withstand higher temperatures. The cylinder bore is 67mm. Taida Big Bore Combo 67mm 232cc 2V w/Forged Piston Fit 57mm including the following parts Taida 67mm (232cc) ceramic cylinder kit with forged piston, Taida oversize 2V head 30.5/26.5, Taida T300 Camshaft, Taida 57mm rocker arm set, and Taida 8200 Crankshaft with stud and chain (66mm stroke). Taida Big Bore Combo 67mm 232cc 2V is suitable for air-cooled 4 stroke 205-232cc Kymco engines (scooters), and most Chinese imported vehicles 125/150cc (scooters, quads, and buggies).

NOTE: Boring and machining may require unless used Taida Crankcase (Part# GY6-KS-S or GY6-KS-L).

Specifications:

100% Taida Products – NO SUBSTITUTE.

1.    Includes Taida Ceramic Cylinder 67mm 2V, Piston + Rings, Gaskets (chain tensioner gasket, Hi and Low compression base gaskets, steelhead gasket), Wrist pin, Circlips, and Taida Sticker.
•    1x Forged-Alumin Piston: 67mm
•    5x Piston Rings (installed): 67mm 0.8/0.8/2.0
•    1x Wrist Pin w/G-clips: 36mm x 15mm
•    1x Ceramic Cast-Iron Cylinder: 67mm
•    Outer Sleeve Diameter: 69.5mm
•    Cylinder Height (w/o sleeve): 75.4mm (no spacer needed)
•    Overall Height (w/sleeve): 100mm
2.    Includes Taida Cylinder Head 67mm 2V NON-EGR, Valves Assembly, Gaskets (manifold spacer +gasket, steel exhaust gasket), intake\exhaust studs, nuts, and Taida Sticker.
•    1x Cylinder Head Stud Space: 57mm / H: 66.6mm / Intake Port: 27.6mm / Exhaust Port: 26.5mm
•    2x Valves: 30.5x73mm Intake / 26.5x71.5mm Exhaust / Stem: 5mm / (w/intake valves) H: 74<76.7mm
•    1x Plastic Intake Manifold Spacer L: 58mm / ID: 28mm / W: 38mm / H: 5.15mm
•    1x Paper Intake Manifold Gasket L: 58mm / ID: 28mm / W: 38mm / H: 1mm
•    Intake Manifold Gasket Bolt-to-Bolt Space: 45mm
•    2x Intake Studs: M6x62mm
•    1x Exhaust Gasket L: 68mm / ID: 27mm / W: 45.15mm / H: 1.9mm
•    Exhaust Gasket Bolt-to-Bolt Space: 45<51mm
•    2x Exhaust Studs: M8x35mm
•    2x Exhaust Nuts: M8x12mm
3.    Includes Taida Camshaft T-300 2V 6.3/6.25 High Rev, and Taida Sticker. 
•    1x Intake lift: 19.4mm - Lobe Greatest: 25.7mm 
•    1x Exhaust lift: 19.2mm - Lobe Greatest: 25.45mm
•    1x Sprocket Teeth: 34
4.    Includes Taida Rocker Arm 2V Assembly, and Taida Sticker. 
•    1x Rocker Arm Holder
•    1x Rocker Arm +Shaft (inlet)
•    1x Rocker Arm +Shaft (outlet)
•    2x Valve Adjusting M5x0.50mm Tappets  
•    2x Valve Adjusting M9x5mm Nuts
5.    Includes Taida Extended Crankshaft (66mm stroke) 2V, Woodruff keys, and Taida Sticker.
•    1x Crankshaft L: 285mm / Stroke L: 57.8mm +8.2mm (8200-micron) = 66mm
•    1x Piston Wrist Pin Slot ID: 15mm
•    1x Flywheel Shaft Thread: M12 x 16mm
•    1x Flywheel Shaft Bearing: 56mm x 22mm x 15mm
•    1x Variator Shaft Thread: M12 x 16mm
•    1x Variator Shaft Splines: 19
•    1x Variator Shaft Bearing: 56mm x 22mm x 15mm
6.    Includes Taida Extended 47 (94) Links Cam Chain and Taida Sticker.
•    1x Cam Chain 47 (94) links
•    Made by Kymco
7.    Includes Taida Cylinder Stud 200/208 2V and Taida Sticker.
•    2x Studs (Rt Crankcase): 8mm x 200mm
•    2x Studs (Lt Crankcase): 8mm x 208mm
•    Made in Taiwan
•    Fit Intake Studs: M6 / Nuts: M6 / Socket: 8mm
•    Fit Exhaust Studs: M8 / Nuts: M8 / Socket: 10mm
•    Fit Flywheel/Variator/Clutch Shaft Nuts: M12 / Washers: M12 / Socket: 17mm
•    Fit Cylinder Stud Nuts: M8 / Washers: M8 / Socket: 12mm
•    Fit 57mm Stud Spacing (B-Block)
•    Fit Dowel Pin Set (8x14mm)
•    Fit Dowel Pin Set (10x20mm)
•    Fit Chain Guide (standard)
•    Fit GY6 125/150cc+

Supported Models: Taida Crankcase (Part# GY6-KS-S / GY6-KS-L); GY6 161QMK 161QML Chinese Scooter, ATV, Kymco, Ruckus, Vento

-----
Item Weight & Product Dimensions:
•   2.419 pounds | 5.406" (L) x 3.923" (W) x 3.937" (H)
•   2.743 pounds | 5.773" (L) x 5.393" (W) x 3.019" (H)
•   0.612 pounds | 3.05" (L) x 2.625" (W) x 1.259" (H)
•   0.538 pounds | 4.457" (L) x 2.875" (W) x 1.062" (H)
•   6.144 pounds | 11.5" (L) x 5.25" (W) x 4.75" (H)
•   0.235 pounds | 3.946" (L) x 2" (W) x 0.771" (H)
•   0.478 pounds | 7.874 / 8.189" (L) x 0.315" (W) x 0.250" (H)