Taida Cylinder 61mm 171cc 2V Forged Big Bore Kit Quad Combo Fit 54mm (GY6)

Description: High-Quality Taida Cast-Iron Cylinder 61mm 171cc with Forged Aluminum Piston offers better durability and reduced friction for GY6 125/150cc+ engines. The cylinder bore is 61mm. Taida Cylinder Big Bore Kit Quad Combo 61mm 171cc 2V w/Forged Piston Fit 54mm including the following parts Taida 61mm (171cc) cylinder kit with forged piston, Taida oversize 2V head 28/23, Taida T300 Camshaft, and Taida 54mm rocker arm set. Taida Cylinder Big Bore Kit Quad Combo 61mm 171cc 2V is suitable for all air-cooled 4 strokes; 125-150cc Kymco engines (scooters), and most Chinese imported vehicles GY6 125/150cc (scooters, quads, and buggies).

NOTE: The Taida Cylinder 61mm Jug will NOT work on Genuine Buddy 125 (see NCY Part# 1100-1287). Also, please measure with a caliper GY6 crankcase bore (opening) for 62.7mm cylinder outer diameter sleeve need a minimum of 62.9mm bore clearance or boring and machining are required.

Specifications:

100% Taida Products – NO SUBSTITUTE.

1.    Includes Taida Cylinder 61mm 2V, Forged Piston + Rings, Gaskets (chain tensioner gasket, Hi and Low compression base gaskets, steelhead gasket), Wrist pin, Locking rings, and Taida Sticker.
•    1x Forged-Alumin Piston: 61mm*
•    5x Piston Rings (installed): 61mm Thick: ||mm
•    1x Wrist Pin w/G-clips: 36mm x 15mm 
•    1x Cast-Iron Cylinder 61mm 
•    Outer Sleeve Diameter: 62.7mm
•    Cylinder Height (w/o sleeve): 69.3mm
•    Overall Height (w/sleeve): 90mm
2.    Includes Taida Cylinder Head 61mm 2V NON-EGR, Valves Assembly, Gaskets (manifold spacer +gasket, steel exhaust gasket), intake\exhaust studs, nuts, and Taida Sticker.
•    1x Cylinder Head Stud Space: 54mm / H: 60mm / Intake Port: 26.5mm / Exhaust Port: 25mm
•    2x Valves: 28x66mm Intake / 23x65.6mm Exhaust / Stem: 5mm / (w/intake valves) H: 67<69.3mm
•    1x Plastic Intake Manifold Spacer L: 58mm / ID: 28mm / W: 38mm / H: 5.15mm
•    1x Paper Intake Manifold Gasket L: 58mm / ID: 28mm / W: 38mm / H: 1mm
•    Intake Manifold Gasket Bolt-to-Bolt Space: 45mm
•    2x Intake Studs: M6x62mm
•    1x Exhaust Gasket L: 68mm / ID: 27mm / W: 45.15mm / H: 1.9mm
•    Exhaust Gasket Bolt-to-Bolt Space: 45<51mm
•    2x Exhaust Studs: M8x35mm
•    2x Exhaust Nuts: M8x12mm
3.    Includes Taida Camshaft T-300 2V 6.3/6.25 High Rev
•    1x Intake lift: 19.4mm - Lobe Greatest: 25.7mm
•    1x Exhaust lift: 19.2mm - Lobe Greatest: 25.45mm
•    Sprocket Teeth: 34
4.    Includes Taida Rocker Arm 2V Assembly
•    1x Rocker Arm Holder
•    1x Rocker Arm +Shaft (inlet)
•    1x Rocker Arm +Shaft (outlet)
•    2x Valve Adjusting M5x0.50mm Tappets 
•    2x Valve Adjusting M9x5mm Nuts
•    Made in Taiwan
•    Fit Intake Studs: M6 / Nuts: M6 / Socket: 10mm
•    Fit Exhaust Studs: M8 / Nuts: M8 / Socket: 12mm
•    Fit Cylinder Studs: 187.5mm 195.5mm / Nuts: M8 / Washers: M8 / Side Bolts: M6 / Socket: 8mm-12mm
•    Fit 54mm Stud Spacing (A-Block)
•    Fit Crankshaft 57.8mm +3mm
•    Fit Dowel Pin Set (10x14mm)
•    Fit Cam Chain 45 (90) links
•    Fit Chain Guide (standard)
•    Optional: cut plastic fan shroud for best fitment

CORRECTION: piston "EX" smaller valve indent should be facing down toward the exhaust. This means the entire piston engrave 61mm and the Taida Star symbol would be upside-down NOT like the video shown. We did this for the reading aesthetic of what piston size/brand installed. *New designed, now come aesthetically upright Taida Star symbol and it's marked "IN" piston near indent should face up (intake).

Supported Models: GY6 Crankcase (Part# 1100-1418); GY6 152QMI 157QMJ Chinese Scooter, ATV, Genuine Buddy, Kymco, Ruckus, Vento
-----
Item Weight & Product Dimensions:
•    2.931 pounds | 5.5" (L) x 4.972" (W) x 3.582" (H)
•    2.318 pounds | 5.804" (L) x 5.313" (W) x 2.728" (H)
•    0.619 pounds | 3.05" (L) x 2.625" (W) x 1.259" (H)
•    0.528 pounds | 4.457" (L) x 2.875" (W) x 1.062" (H)