Taida Cylinder 61mm 171cc Big Bore Kit w/Cast Piston Fit 54mm (GY6)

Description: High-Quality Taida Cast-Iron Cylinder 61mm 171cc with Cast Aluminum Piston for GY6 125/150cc + engines. The cylinder bore is 61mm. Taida 61mm Cylinder Big Bore Kit is suitable for all air-cooled 4-strokes; 125-150cc Kymco engines (scooters), and most Chinese imported vehicles GY6 125/150cc (scooters, quads, and buggies).

NOTE: The Taida Cylinder 61mm Jug will NOT work on Genuine Buddy 125 (see NCY Part# 1100-1287). Also, please measure with a caliper GY6 crankcase bore (opening) for 62.7mm cylinder outer diameter sleeve need a minimum of 62.9mm bore clearance or boring and machining are required.

Specifications:

Includes the following Cylinder, Piston + Rings, Gaskets (chain tensioner gasket, Hi and Low compression base gaskets, steelhead gasket), Wrist pin, Circlips, and Taida Sticker.

•    1x Cast-Alumin Piston: 61mm*
•    5x Piston Rings (installed): 61mm Thick: 1|1|2mm
•    1x Wrist Pin w/G-clips: 48.5mm x 15mm
•    1x Cast-Iron Cylinder: 61mm 
•    Outer Sleeve Diameter: 62.7mm
•    Cylinder Height (w/o sleeve): 69.3mm

•    Overall Height (w/sleeve): 90mm
•    Made in Taiwan
•    Fit Intake Studs: M6 / Nuts: M6 / Socket: 10mm
•    Fit Exhaust Studs: M8 / Nuts: M8 / Socket: 12mm
•    Fit Cylinder Studs: 187.5mm 195.5mm / Nuts: M8 / Washers: M8 / Side Bolts: M6 / Socket: 8mm-12mm
•    Fit 54mm Stud Spacing (A-Block)
•    Fit 54mm Rocker Arm 2V Assembly
•    Fit Crankshaft 57.8mm +3mm
•    Fit Dowel Pin Set (10x14mm)
•    Fit Cam Chain 45 (90) links
•    Fit Chain Guide (standard)
•    Fit 54mm Cylinder Head 58.5mm to 61mm 2V
•    Fit GY6 125/150cc+
•    Optional: cut plastic fan shroud for best fitment

Supported Models: GY6 Crankcase (Part# 1100-1418); GY6 152QMI 157QMJ Chinese Scooter, ATV, Genuine Buddy, Kymco, Ruckus, Vento

-----
Item Weight & Product Dimensions:
•    2.937 pounds | 5.5" (L) x 4.972" (W) x 3.582" (H)