TFC Variator 89mm Racing (DIO, QMB)

Description: TFC Variator 89mm Racing for Honda Dio/Elite 50cc engines, 139QMB, and Kymco 50cc 4-stroke engines. The variator takes a weight size of 16x13mm (sold separately). 

Compatible with CVT unit on the market work on Honda Dio AF16 AF18E 50; Elite S/SE/SR 1994-2001, Daelim Cordi 50, Kymco Fever/ZX50, SYM DD50, GY6 40QMB 50cc 2-stroke, 139QMB 49cc-50cc 4-stroke, 50QMF 90cc-100cc, GY6 139QMB 49cc-50cc engines, Buddy50, Filly 50, Kymco, QLink, Peugeot, Piaggio, RoughHouse, SYM, TaoTao, and virtually any scooter engine with these measurements.

NOTE: Recommend using a new belt with this kit. The belt and the belt drive-facing plates KEEP DRY. All, other areas apply moly-graphite grease when assembling.

Installation: Make sure variator drive face is seated properly and not get its teeth chewed by the Bendix: 1. Slack the belt by opening the CVT clutch giving belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Includes the following Variator housing, and Variator top.

•    1x Alumin-Alloy Housing ID: 20mm / OD: 89mm / H: 32.7mm
•    1x Stainless Steel Boss L: 36mm / ID: 14mm / OD: 19.92mm
•    2x Boss Shims L: 0.5mm / ID: 14mm / OD: 19.92mm
•    1x Metal Top ID: 14mm / OD: 73.9mm / H: 11.8mm
•    3x Plastic Slides (black) L: 12mm / W: 15.3mm / ID: 5mm / H: 9.85mm
•    Made in Taiwan
•    Fit Starter: Bendix / Lock: Bracket
•    Fit Variator Weights: 16x13mm / Boss: 20mm / Shims: 20mm
•    Fit Variator Shaft Nut: M12 / Washer: M12 / Socket: 17mm
•    Fit Belt Size: 669, 729, 788-18-30 (Fit QMB ONLY)
•    Fit Belt Size: 654, 669-18-30 (Fit DIO ONLY)
•    Fit Dowel Pin Set (8x10mm)
•    Fit DIO 49/90cc+
•    Fit QMB 49/50cc+

Supported Models: TFC CVT KIT (Part# 179-2); Honda Dio AF16 AF18E 50; Elite S/SE/SR 1994-2001, Daelim Cordi 50, Kymco Fever/ZX50, SYM DD50, GY6 40QMB 50cc 2-stroke, 139QMB 49cc-50cc 4-stroke, 50QMF 90cc-100cc, GY6 139QMB 49cc-50cc engines, Buddy50, Filly 50, Kymco, QLink, Peugeot, Piaggio, RoughHouse, SYM, TaoTao, and virtually any scooter engine with these measurements.

-----
Item Weight & Product Dimensions:
•    0.556 pounds | 3.505" (L) x 3.505" (W) x 1.289" (H)