G- Clutch Kit (CFMoto, CN250)

Description: Clutch Kit for CFmoto V3/V5 and CN250 172mm 250cc 4-stroke water-cooled engines.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Includes the following Secondary sliding sheave assembly, Comp spring, Clutch, Clutch springs, and Clutch bell.

1.    Includes Secondary Sliding Sheave Assembly, slider (torque driver), O-rings, and clutch nut. 
•    1x Alumin Rear Pulley Plate OD: 160mm / Metal Shaft ID: 22.4<22.7mm / OD: 30mm / H: 81<86.5mm
•    1x Alumin Secondary Slider Plate OD: 160mm / Metal Funnel ID: mm / OD: mm / H: mm
•    1x Metal Secondary Spring Seat/Funnel ID: mm / OD: 52mm / H: mm
•    3x Stainless Steel Secondary Slider Guides ID: mm / OD: mm / L: mm
•    3x Stainless Steel Secondary Slider Pins OD: mm / H: mm
•    2x Rubber O-rings (pre-installed)
•    1x Bearing HK222918RS ID: 22.4mm
•    1x Stainless Steel Clutch Nut OD: 40.9<46mm / ID: M29 / H: 4.5mm
2.    Includes Compression Spring, Compression spring.
•    1x Spring Comp: RPM / L: mm
•    Spring ID: mm / OD: mm
•    Wire Gauge: mm
3.    Includes Clutch, Clutch housing, Clutch springs, and Clutch weights.
•    1x Clutch ID: 26.2<30mm / OD: 131.5mm / H: 39mm
•    3x Clutch Weights (shoes)
•    3x Clutch Springs
4.    Includes Clutch Bell, Clutch Bell.
•    1x Iron Clutch Bell Weight: 955.4gm / ID: 135mm / OD: 147.5mm / H: 50.1mm
•    Splines: 19 / ID: 13.5<14.9mm / OD: 21mm / H: 26.85mm
•    Fit Impact Socket: 41mm
•    Fit CFMoto
•    Fit CN250+

Supported Models: CFmoto V3/V5, CN250 172mm 250cc 4-stroke water-cooled engines, Boreem (BMS), Kazuma, Lifan, Roketa MC13-250, Roketa MC54-250B, SUNL SL250-22, Tank Touring 250T-H, Tank Touring DE, and various unlisted makes/models.

-----
Item Weight & Product Dimensions:
•    8.806 pounds | 5.7" (OD) x 0.531<5.27" (ID) x 3.779" (H)