Description: Clutch Drive Shaft 174mm for GY6 125/150cc 4-stroke QMJ152/157 engines.Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the cen..
Description: Clutch Drive Shaft for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models. Specifications: Include the following Clutch drive shaft.• 1x Clutch Drive Shaft L: 213mm (8.4 in)• Splines: 16 / T..
Description: Clutch Kit for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face whi..
Description: Clutch Kit for CFmoto V3/V5 and CN250 172mm 250cc 4-stroke water-cooled engines.Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further awa..
Description: G- Clutch Nut M28x4mm quite possibly the most durable clutch nut you'll ever need for 139QMB and GY6 engines. NOTE: You'll need an impact 39mm socket to take the clutch nut off and put it back on—please safeguard your face while loosening the clutch nut!Specifications:Inc..
Description: Counter Shaft Gear 13*42 pre-pressed aka countershaft reduction gear for GY6 125/150cc 4-stroke engines. These gears original replacement (13/42 teeth) only.NOTE: Already pre-pressed countershaft gear 13*42 on counter shaft. No need for A 12-ton hydraulic compressor. Just pop ..
Description: Counter Shaft Gear 15*52 pre-pressed aka countershaft reduction gear for direct stock replacement of 139QMB 49/50cc 4-stroke shortcase engines.NOTE: Already pre-pressed countershaft gear 15*52 on counter shaft. No need for A 12-ton hydraulic compressor. Just pop out stock counter s..
Description: Counter Shaft Gear 16*40 for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Specifications: Include the following Transmission gear set.• 1x Front Counter Shaft Teeth: 16 / Spline L: 20mm / OD: 15mm&..
Description: Crankcase 63mm Bore A-Block 54mm GY6 longcase. The crankcase bore is a 63mm opening and can fit 54mm A-Block 61mm cylinder and 61mm cylinder head.NOTE: This is NOT a complete engine. Need to reuse donor parts from A-Block (54mm) or B-Block (57mm) ..
Description: Crankcase Bushing Front aka engine hanger bushing is made of a sturdy metal sleeve and wear-resistant rubber which also makes installing it so much easier with a compressor tool. Crankcase Bushing Front that includes one front crankcase bushing fit either the front left or front right s..
Description: Crankcase Bushing Rear is made of a metal sleeve and sturdy rubber which also makes installing them so much easier with a compressor tool. Crankcase Bushing Rear that includes one rear engine shock bushing for 139QMB 49/50cc, GY6 125/150cc crankcase.NOTE: Also, available in Crankcase Bu..
Description: Crankcase Bushing Front Set is made of a metal sleeve and sturdy rubber which also makes installing them so much easier with a compressor tool. Crankcase Bushing 2-front Set includes two front crankcase bushings. Interchangeable fit either the front left or front right side of the ..
Description: Crankcase Bushing Set is made of a metal sleeve and sturdy rubber which also makes installing them so much easier with a compressor tool. Crankcase Bushing 3-Piece Set includes two front crankcase bushings and one rear engine shock bushing.Specifications: Includes the following Three-pi..
Description: Crankcase Cover Gasket Right for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Specifications: Includes the following Right-side crankcase gasket.• 1x Crankcase Gasket (right) Gasket / Bore: mm• ..
Description: GY6 Crankshaft 57.8mm Standard Stroker assembly for GY6 125/150cc 4-stroke 152QMI / 157QMJ engines.Temperature Modification May Be Required: You'll need to heat the aluminum crankcase area where the crankshaft bearing side will be placed, in order to immediately fit the frozen cran..
Description: Crankshaft Needle Bearing 15x28x15mm Set of 2 for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Specifications:Include the following Needle bearing.• Number of Rollers: 13• Length Steel Cage: 15m..
Description: G- CVK Main Jet 100-140 10-Pcs Kit for 139QMB 49/50cc, GY6 125/150cc+ CVK carburetors, and 250cc 4-stroke water-cooled 172mm carburetors. Includes 10-pieces, size range from #100 - #140.NOTE: Will work on 139QMB CVK carburetor (Part# NK200.06) that accept 5mm main jet ONLY. Most commonl..
Description: G- CVK Main Jet 72-110 10-Pcs Kit for 139QMB 49/50cc+ CVK carburetors. Includes 10-pieces, size range from #72 - #110.Specifications:Includes the following 10 Piece Set (1 of each size main jets).• Main Jet Sizes: 72, 75, 78, 80, 85, 90, 95, 100, 105 & 110 RPM •&nb..
Description: CVK Throttle Cable 76 inches with 45° angle mount for CVK carburetor on 139QMB 49/50cc, GY6 125/150cc+, Honda Ruckus, and many others models of GY6-based Chinese scooters. If you need a longer CVK throttle cable due to that Honda stretch this is it can be used on Honda ruckus with a CVK..
Description: CVK Throttle Cable 84 inch with 45° angle mount for CVK carburetor on 139QMB 49/50cc, GY6 125/150cc+, Honda Ruckus, and many others models of GY6-based Chinese scooters.If you need an extra longer CVK throttle cable due to that extreme Honda stretch this is it can be used on Honda rucku..
Description: CVT Air Duct Gasket Left for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Specifications:Include the following Air duct gasket.• 1x Air Duct Gasket ID: 123mm / OD: 126mm / Thickness: 3mm• F..
Description: CVT Air Duct Left for VOG 260 BN169MM Engines commonly found in Linhai 250/260/300 Scooters and many other makes and models.Specifications:Includes the following CVT air duct.• 1x CVT Air Duct Left:• 4x Bolt Holes: • Fit Aprilia..
Description: G- Premium CVT Drive Belt size 654-18-30 is made in Japan, not China's version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-road ap..