Main Menu
Your Cart

Naraku

Brand: Naraku Model: NK200.01
Description: Naraku V.3 carburetor 18.5mm for 50cc 4-stroke scooters. Naraku quality at an affordable price. Unlike most Chinese alternatives that have start issues, the Naraku V.3 carburetor has a good drive. Prevents flat spots and allows you to conveniently drain the float bowls. Complete with E-..
$69.00
Ex Tax:$69.00
Brand: Naraku Model: NK200.06
Description: Naraku 24mm pressure-controlled tuning carburetor. 24mm intake for 85cc+ cylinders with relevant sized heads. E-choke and 102 Main Jet, with 42mm air filter connection. No accelerator pump to prevent over oiling. Great for a performance increase on 85-180cc 4-stroke engines. Supplied je..
$84.00
Ex Tax:$84.00
Brand: Naraku Model: NK700.13
Description: Naraku Racing Carburetor 30mm for GY6 125/150cc 4-stroke scooters. Includes auto choke. Throttle cable layout on the side. Build height corresponds with the original. This carb will help your performance engine breathe easier and goes well with a big-bore cylinder. Air filter connection..
$114.00
Ex Tax:$114.00
Brand: Naraku Model: NK200.02
Description: Naraku Racing Carburetor High-Performance 30mm for GY6 125/150cc 4-stroke scooters. Includes auto choke. Throttle cable layout on the side. Build height corresponds with the original. This carb will help your performance engine breathe easier and goes well with a big-bore cylinder. Air ..
$179.95
Ex Tax:$179.95
Brand: Naraku Model: NK950.01
Description: The Naraku Performance 107mm Scooter Sport Clutch works on both two-stroke and 139QMB 49cc-50cc 4-stroke GY6 50 engine based scooters, ATVs, and off-road karts. Also, fit Honda Dio/Elite and Honda GET only with conversion secondary pulley assembly. This is one of the most..
$64.95
Ex Tax:$64.95
Brand: Naraku Model: 137-62
Description: Naraku Clutch Bell clutch bell/drum for 139QMB 49cc-50cc 4-stroke GY6 50 engine based scooters, ATVs, and off-road karts. Also, fit Honda Dio/Elite and Honda GET only with conversion secondary pulley assembly.Naraku High-Performance clutch bell with a patented R-Vent syst..
$57.00
Ex Tax:$57.00
Brand: Naraku Model: NK900.63
Description: Naraku Compression Spring aka torque spring does a couple of things. First, they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. Markings..
$14.95
Ex Tax:$14.95
Brand: Naraku Model: NK900.64
Description: Naraku Compression Spring aka torque spring does a couple of things. First, they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 1500rpm spring. Markings..
$14.95
Ex Tax:$14.95
Brand: Naraku Model: NK900.65
Description: Naraku Compression Spring aka torque spring does a couple of things. First, they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. Markings ..
$14.95
Ex Tax:$14.95
Brand: Naraku Model: NK900.50
Description: Naraku Compression Spring aka torque spring does a couple of things. First, they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. Markings ..
$39.95
Ex Tax:$39.95
Brand: Naraku Model: GY14656
Description: Naraku Counter Shaft Gear 13*42 pre-pressed for GY6 125/150cc 4-stroke engines. This is stock replacement countershaft gear assembly manufacturer by Naraku, these gears original replacement (13/42 teeth) only.NOTE: Already pre-pressed countershaft gear 13*42 on counter shaft. No need fo..
$19.95
Ex Tax:$19.95
Brand: Naraku Model: NK101.70
Description: Naraku Crankshaft Needle Bearing 17x12x13mm for Honda DIO and Honda Elite. OEM Replacement Naraku Crankshaft Needle Bearing 17mm (OD) x 12mm (ID) x 13mm (W) and cage assemblies for the crankshaft and piston pins for Honda Dio (AF16-AF18E) engines. OEM quality small end bearing (17x12x13..
$15.95
Ex Tax:$15.95
Brand: Naraku Model: NK900.05
1P39QMB shortcase / Tire Size 3.50-10" RimDescription: Naraku Brand Premium CVT Drive Belt size 669x18x30 are made in Taiwan, not China version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet its flexible not harsh on aluminum driveface like "Kevlar" which ..
$26.53
Ex Tax:$26.53
Brand: Naraku Model: NK900.54
Description: Naraku Brand Premium CVT Drive Belt size 729x18x30 is made in Taiwan, not China's version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-r..
$26.53
Ex Tax:$26.53
Brand: Naraku Model: NK900.73
Description: Naraku Brand Premium CVT Drive Belt size 743-20-30 is made in Taiwan, not China's version. Standard fit for GY6 150cc 4-stroke ATVs and Street Scooters with a 10-inch rear wheel shortcase engine.NOTE: Another way to determine if you have a GY6 shortcase or longcase engine? If it has 10 ..
$29.95
Ex Tax:$29.95
Brand: Naraku Model: 137-24
Description: Naraku Brand Premium CVT Drive Belt size 788x18x30 is made in Taiwan, not China's version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-r..
$26.53
Ex Tax:$26.53
Brand: Naraku Model: NK900.72
GY6 longcase length: 17-7/8 inches Description: Naraku Brand Premium CVT Drive Belt size 835-20-30 is made in Taiwan, not China's version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are..
$29.95
Ex Tax:$29.95
Naraku CVT KIT (139QMB, Buddy, RoughHouse) Naraku CVT KIT (139QMB, Buddy, RoughHouse)
4 - 10 Days
Brand: Naraku Model: KIT.A.139QMB
Description: Complete Naraku CVT Kit 139QMB aka Super CVT transmission kit for GY6 50cc engines, all tuned to another. Since Chinese-built scooters are not upgraded with top-end components out of the factory, this is the easiest way to overhaul the transmission without expert help. This negates any ..
$204.00
Ex Tax:$204.00
Brand: Naraku Model: KIT.A.139QMB.L
Description: Naraku CVT KIT ECO(nomy) 139QMB aka Performance CVT transmission kit for GY6 50cc engines, has all major performance parts to tuned your CVT\transmission. Since Chinese-built scooters are not upgraded with top-end components out of the factory, this is the easiest way to overhaul the tr..
$124.95
Ex Tax:$124.95
Brand: Naraku Model: NK100.52
Description: High-Quality Naraku Cast-Iron Cylinder 52.4mm 94.9cc with Forged Aluminum Piston offers better durability and reduced friction for 139QMB 49/50cc + engines. The cylinder bore is 52.4mm. Naraku Cylinders' Combo 52.4mm 94.9cc 2V w/Cast Piston including the following parts Naraku 52.4..
$223.95
Ex Tax:$223.95
Brand: Naraku Model: NK600.02
Description: High-Quality Naraku Cast-Iron Cylinder 63mm 180cc with Cast Aluminum Piston for GY6 125/150cc + engines. The cylinder bore is 63mm. Naraku 63mm Cylinder Big Bore Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engines (scooters), and most Chinese imported vehicles 125/150cc ..
$94.00
Ex Tax:$94.00
Brand: Naraku Model: NK600.02F
Description: High-Quality Naraku Cast-Iron Cylinder 63mm 180cc with Forged Aluminum Piston offer better durability and reduced friction for GY6 125/150cc + engines. The cylinder bore is 63mm. Naraku 63mm Cylinder Big Bore Kit is suitable for all air-cooled 4 strokes 125-150cc Kymco engines (scooters..
$162.00
Ex Tax:$162.00
Brand: Naraku Model: NK100.13
Description: Naraku Cylinder Head 52.4mm 94.9cc 2V 23/20 for 139QMB 49/50cc 4-stroke engines. Common problems with stock cylinder heads on the Chinese 4-stroke engines are generally known to be expensive repair maintenance costs. Chinese replacement cylinder heads for GY6 engines are only of me..
$135.95
Ex Tax:$135.95
Brand: Naraku Model: 137-10
Description: Naraku Cylinder Head Wear-Resisting 2 valves with a larger 27.5 intake / 23 exhaust ports will allow your GY6 cylinder to breathe better! Works great with Naraku Cylinder 63mm 180cc Big Bore Kit w/Forged Piston. When changing a cylinder kit or an exhaust, it's a clever idea to pick..
$133.00
Ex Tax:$133.00
Brand: Naraku Model: NK101.86
Description: These Naraku replacement cylinder stud nuts work with many scooter cylinder big bore kits. The nut length allows for solid mounting of the cylinder top-end system, in a way that standard nuts cannot. These nuts can be used for other purposes. Commonly used in Minarelli, Kymco, MBK, Yama..
$8.95
Ex Tax:$8.95
Showing 1 to 25 of 46 (2 Pages)