Ban Jing Drive Face Fan 116mm Forged (Honda PCX)
Description: Ban Jing lightweight forged variator drive face 116mm for Honda PCX 125 and 150. Color available: Blue, and Red.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
Include the following Drive face fan.
• 1x Forged Drive Face Fan Weight: 150gm / OD: 116mm
• Splines: 28 / ID: 14.1mm<15mm / H: 22.4mm
• Color Choice: Blue, Red
• Made in Taiwan
• Fit Variator Shaft Shims: 24mm / Nut: M14 / Washer: M14 / Socket: 22mm
• Fit Belt Size: 816, 836-22-30
• Fit Dowel Pin Set (8x10mm)
• Fit PCX 125/150cc+
Supported Models: Polini CVT KIT (Part #146-69); Honda PCX 125/150cc (2010 and newer)
Item Weight & Product Dimensions:
• 0.330 pounds | 7.6" (L) x 5.48" (W) x 1.630" (H)
People Also Bought
- Stock: 36
- Reward Points: 1
- Part #: 169-535