Main Menu
Your Cart

G- Variator Ramp Top (GY6B)

G- Variator Ramp Top (GY6B)
G- Variator Ramp Top (GY6B)
G- Variator Ramp Top (GY6B)
G- Variator Ramp Top (GY6B)

Description: Variator Ramp Top aka variator pressure plate for GY6B 150cc 4-stroke ZNEN transmission! commonly found in Lance Phoenix, Flyscooters Cadenza, ZNEN ZN150T-18, Xingyue ITA-150, Motorino Cassini, CMS Prodigy, BMS Pathfinder, and many more. Variator Housing (Sold Separately, Part# 165-8).

NOTE: Recommend using a new belt with this kit. Belt and the belt drive-facing plates KEEP DRY. All, other areas apply moly-graphite grease when assembling.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.


Include the following Variator top only.

•    1x Metal Top ID: 17mm / OD: 89mm / H: mm
•    Fit Variator Housing: 123mm Weights: 20x15mm Slides: 3 Boss: 24mm / Shims: 24mm / Drive Spline: 21
    Fit Variator Shaft Nut: M14 / Washer: M14 / Socket: 22mm
•    Fit Dowel Pin Set (8x10mm)
•    Fit Belt Size: 842-20-30
•    Fit GY6B 150cc+

Supported Models: GY6B 150cc 4-stroke; BMS Pathfinder, BN157QMJ-3A, CMS Prodigy, Flyscooters Cadenza, Lance Phoenix, Motorino Cassini, Xingyue ITA-150, ZNEN ZN150T-18

Item Weight & Product Dimensions:
•    0.156 pounds | 3.503" (OD) x 0.669" (ID) x 0.456" (H)

Write a review

Note: HTML is not translated!
Bad Good
G- Variator Ramp Top (GY6B)
  • Stock: 39
  • Part #: 165-37
Sold: 1
Views: 1802
Ex Tax: $10.95
Price in reward points: 11