NCY Drive Face Fan (JOG, Vino, Zuma 50)
Description: NCY Drive Face Fan for your horizontal 2-stroke (2T) Minarelli Jog Engines, Yamaha Vino 50 2T, and Yamaha Zuma 50 2T scooters. This drive face fan is a MUST when upgrading your CVT components!
NOTE: Does not include washer (sold separately).
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
Include the following Drive face fan.
• 1x Aluminum Drive Face Fan Weight: gm
• ID: mm / OD: mm / H: mm
• Made in Taiwan
• Fit Clutch Nut: M28 / Socket: 39mm
• Fit Belt Size: 818 (Fit Aprilia ONLY)
• Fit Belt Size: 788 (Fit JOG ONLY)
• Fit Belt Size: 784.5 (Fit Zuma ONLY)
• Fit Clutch Springs: 1k, 1.5k rpm
• Fit Compression Spring: 1k, 2k rpm
• Fit JOG 50
• Fit Vino 50
• Fit Zuma 50
Supported Models: NCY CVT KIT (Part #1200-1197); Yamaha C3, Yamaha Zuma CW50, Yamaha Zuma 50F, Yamaha Vino Minarelli Jog engines, Chinese Yamaha Clones 1PE40QMB 1E40QMB engines, Malaguti, CPI, Aprilia Scooters with Piaggio engines, and Franco-Morini 50cc engines found in the 1E41QMB Suzuki AD50 AG50, TGB R50X, TGB 101, TGB 303, and Peirspeed Scooters.
Item Weight & Product Dimensions:
• 0.412 pounds | 3.732" (OD) x 0.826" (ID) x 1.05" (H)
From Same Category
- Stock: 40
- Part #: 1200-1037