Dr. Pulley Variator Gliding Roller Weight Set 16x31 (Honda 250)
Description: Dr. Pulley 16x31mm Variator Gliding Roller Weight Set for Honda 250cc 4-stroke engines. Gliding Roller Weights for individuals using the J. Costa Variator.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.NOTE: Please select weight from the menu
Features:
• Broadens your range of gear ratios
• Fastest Roller Weights available
• High-Temperature Resistance
• Increases acceleration and re-acceleration properties
• Increases top-end speed
• Lasts longer than standard roller weights
• Low Friction Coefficient (low wear)
• No abrasive fibers (glass fiber or carbon fiber)
• Suitable for aluminum variator housing
Specifications:
• 14x Gliding Weights: 16x31mm 10.5gm<16.5gm
• U.S. Patent Number: 7,276,004
• Material: SL-9T, SL-9TS (oil-less PA46)
• Made in Taiwan
• Fit Honda 250
Supported Models: Honda Forza 250, Honda Jazz 250, Honda Reflex 250
-----
Item Weight & Package Dimensions:
• 0.023~0.036 pounds | 3.486" (L) x 2.852" (W) x 1.050" (H)