Dr. Pulley Variator 120.5mm Performance Set (Honda PCX)
Description: Dr. Pulley Variator 120.5mm Performance Set V211501 for Honda PCX 125/150cc and Honda SH125i/SH150i. This Set increases acceleration and lowers the vibration that is characteristic of the factory Honda PCX variator.Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
Dr. Pulley Variator 120.5mm Set (Honda PCX) – OPTIONAL ADD-ON (IN RED).
Includes the following Variator, Variator ramp plate (top), Variator slides, and Variator boss.
• 1x Alumin-Alloy Housing ID: 24mm / OD: 120.5mm / H: 37.74mm
• 1x Metal Top ID: 15.2mm / OD: 90mm / H: 20.74mm
• 1x Variator Boss ID: 15mm / OD: 23.9mm / L: 46.9mm
• 1x Variator Boss Shim ID: 15mm / OD: 23.9mm / Thick: 1mm
• 3x Plastic Slides (white) ID: 7<8.4mm / L: 22mm / W: 15mm / H: 12.3mm
• Made in Taiwan
• Fit Variator Weights: 21x15mm / Nut: M14 / Washer: M14 / Drive Spline: 28 / Socket: 22mm
• Fit Belt Size: 816, 836-22-30
• Fit Dowel Pin Set (8x10mm)
• Fit PCX 125/150cc+
Supported Models: NCY CVT KIT (Part# 1200-1195); Honda PCX 125/150, Honda SH125i/SH150i
Item Weight & Product Dimensions:
• 1.225 pounds | 4.744" (OD) x 0.944" (ID) x 1.47" (H)
From Same Category
- Stock: 39
- Reward Points: 6
- Part #: 169-364