Gates CVT Belt 748-18-28 PL30504 Premium (Aprilia, Zuma 50)
Description: Gates Powerlink Premium CVT Drive Belt size 748x18x28 is made in China by the U.S.A. Company Standard. Its material used is EPDM (Ethylene Propylene Diene Monomer) used in making automotive and construction for its excellent resistance to environmental factors such as weather and heat resistant up to 130°C (266°F). EPDM strong yet it is flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-road applications. EPDM makes it gentle on CVT recommended for everyday riding use. Gates CVT Drive Belt size 748-18-28 commonly found on Aprilia and Zuma 50.
Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft lbs. For reassurance please consult your manufacturer variator torque specs.
Specifications:
Include the following one belt.
• Poly Reinforcement Cords / EPDM Construction
• Length: 748mm (Loop 14.724 in.)
• Top Width: 18mm (0.708 in.)
• Height: 9mm (0.354 in.)
• Groove Angle: 28º
• U.S.A. Company / manufactured in CHINA
• Fit Aprilia
• Fit Zuma 50
Supported Models: Aprilia Scarabeo 50, Aprilia SR50, Italjet Dragster, Kymco Cobra Cross, Kymco People 50, Kymco People S 50, Kymco Super 9, Kymco Vitality 50, Kymco Yup 50, Malaguti F12, Yamaha Zuma 2001
-----
Item Weight & Product Dimensions:
• 0.295 pounds | 14.724” (L) x 0.708” (W) x 0.354” (D)