NCY Secondary Slider (Vino, Zuma 125)

Description: High-quality, NCY Secondary Slider for use in Yamaha Vino 125, Yamaha Zuma 125, and Yamaha BWS 125 scooters. Do you have a tuned engine that is not putting the power on the ground? NCY Secondary Slider has aggressively angled slits to provide power where you need it and smooth transitions between belt positions with minimal hang up. The 2 different linear options mean you can give more emphasis to acceleration.

NOTE: Before use, lubricate slider grooves, slider pins, ball bearing seat, and inner funnel area with heat-resistant moly-graphite grease.

Installation: 1. Slack the belt by opening the CVT clutch giving belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Includes the following Secondary slider (torque driver) and O-rings.

•    1x Secondary Slider Plate OD: 138mm / Funnel ID: 41mm / OD: 50mm / H: 46.2mm
•    2x Rubber O-ring (pre-installed)
•    Made in Taiwan
•    Fit Clutch: 115.84mm / Bearing Funnel: 50.2mm / Bell Spline: 16 / Socket: 19mm, 46mm
•    Fit Belt Size: 757-21.4-28, 759-22-30 (Fit Vino ONLY)
•    Fit Belt Size: 790.5-21.9, 810-22-28 (Fit BWS, Zuma ONLY)
•    Fit Compression Spring: 1k, 1.5k, 2k rpm
•    Fit Clutch Springs: 1k, 1.5k, 2k rpm
•    Fit BWS 125
•    Fit Vino 125
•    Fit Zuma 125

Supported Models: NCY CVT KIT (Part# 1200-1047); Asia/European model Cygnus 125, Yamaha BWS 125, Yamaha Cygnus 125, Yamaha GTR 125, Yamaha Vino 125, Yamaha Zuma 125

-----
Item Weight & Product Dimensions:
•    0.806 pounds | 5.435" (L) x 1.616" (ID) x 1.818" (H)