Prima Variator Roller Weight Set 16x13 (DIO, GET, QMB)
Description: Prima Variator Roller Weight Set 16x13 for Honda DIO/Elite, GET, and 139QMB 4-stroke engines. These high-quality HD [Heavy Duty] weights not only perform very well as a stock weight replacement but also show their true potential in high-end engines. During production, the inner ring is carefully knurled, and only after this is it bonded with the plastic. This prevents the weight material from separating from the inner ring under temperature fluctuations, which usually happens with cheaper weights. The high PTFE content in the outer material provides good self-lubrication and durability and the characteristics of the Teflon provide smooth Variator shifting. Also suitable for other variators using 18x14 weights.
For those of you unfamiliar with roller weights, they are an important tuning device and have a significant impact on your scooter's performance! They should be checked/changed every 1000 miles (per maintenance schedule) to keep your scooter running tops. Over time, roller weights will develop flat spots which will impair the performance of your scooter.
A good indication that your rollers are worn is increasingly high revs for a given speed and/or decreased top speed. Replacing worn rollers with this set will restore and actually improve your low-end power and especially your top speed. Fuel efficiency will also improve dramatically!
Compatible with most variator roller's housing on the market works on Yamaha JOG Minarelli engines, Chinese Yamaha Clones such as the 1PE40QMB 1E40QMB engines, Honda Ruckus, 139QMB 50cc 4 stroke engines, Vertical Honda DIO style 2 stroke engines found in SYM and Kymco Scooters, as well as Aprilia Scooters with Piaggio engines, and Franco-Morini 50cc engines found in the 1E41QMB Suzuki AD50 AG50, TGB R50X, TGB 101, TGB 303 and Peirspeed Scooters.
Include the following Roller weight set.
• 6x Roller Weights: 16x13mm 3gm<11gm
• Made in Taiwan
• Fit Variator Housing: 88mm, 89mm or 95mm / Slides: 3 / Boss: 20mm / Shims: 20mm
• Fit Variator Shaft Nut: M12 / Washer: M12 / Socket: 17mm
• Fit Belt Size: 654, 669-18-30 (Fit DIO ONLY)
• Fit Belt Size: 660-18-28 (Fit Metro ONLY)
• Fit Belt Size: 785-18-30 (Fit Ruckus ONLY)
• Fit Belt Size: 669, 729, 788-18-30 (Fit QMB ONLY)
• Fit Dowel Pin Set (8x10mm)
• Fit DIO 49/90cc+
• Fit GET 49/50cc
• Fit QMB 49/50cc+
Supported Models: Naraku CVT Kit (Part# KIT.A.139QMB); Honda Dio AF16 AF18E 50; Elite S/SE/SR 1994-2001, Daelim Cordi 50, Kymco Fever/ZX50, SYM DD50, GY6 40QMB 50cc 2-stroke, 139QMB 49cc-50cc 4-stroke, 50QMF 90cc-100cc, GY6 139QMB 49cc-50cc engines, Buddy50, Filly50, Kymco, MetropolitanGET, QLink, Peugeot, Piaggio, RoughHouse, RuckusGET, SYM, TaoTao, and virtually any scooter engine with these measurements.
Item Weight & Package Dimensions:
• 0.006~0.024 pounds | 3.486" (L) x 2.852" (W) x 1.050" (H)