Polini Variator 95mm Set (DIO, QMB)
Description: Polini Variator 95mm Set for 139QMB 49cc-50cc 4-stroke, Kymco, Lance 49/50cc 4-Stroke Scooters. This kit is designed to improve acceleration on stock, untuned scooters.
Compatible with CVT unit on the market work on Honda Dio AF16 AF18E 50; Elite S/SE/SR 1994-2001, Daelim Cordi 50, Kymco Fever/ZX50, SYM DD50, GY6 40QMB 50cc 2-stroke, 139QMB 49cc-50cc 4-stroke, 50QMF 90cc-100cc, GY6 139QMB 49cc-50cc engines, Buddy50, Filly 50, Kymco, QLink, Peugeot, Piaggio, RoughHouse, SYM, TaoTao, and virtually any scooter engine with these measurements.
NOTE: Does not fit Fuel Injected models. Recommend using a new belt with this kit. Belt and the belt drive-facing plates KEEP DRY. All, other areas apply moly-graphite grease when assembling.
Installation: Make sure variator drive face is seated properly and not get its teeth chewed by the Bendix: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctite, torque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.
Includes the following Variator, Variator boss, Variator ramp plate, Variator slides, and Roller weights.
1. Includes Variator, Boss, Roller weights, Variator housing, Variator slides, Variator top
• 1x Alumin-Alloy Housing ID: 14mm / OD: 95mm / H: mm
• 1x Stainless Steel Boss L: 38mm / ID: 14mm / OD: 19.9mm
• 1x Metal Top ID: 20mm / OD: mm / H: mm
• 6x Roller Weights (black): 16x13 9gm
• 3x Plastic Slides (blue)
• Made in Italy
• Fit Starter: Bendix / Lock: Bracket
• Fit Variator Shims: 20mm
• Fit Variator Shaft Nut: M12 / Washer: M12 / Socket: 17mm
• Fit Belt Size: 669, 729, 788-18-30 (Fit QMB ONLY)
• Fit Belt Size: 654, 669-18-30 (Fit DIO ONLY)
• Fit Dowel Pin Set (8x10mm)
• Fit DIO 49/90cc+
• Fit QMB 49/50cc+
Supported Models: Naraku CVT Kit (Part# KIT.A.139QMB.L); 139QMB, 1P39QMB, 50QTB 49cc-50cc 4-stroke engines, Kymco Agility, Kymco People S 50, Kymco Super 8, SYM Fiddle 2, Jet 4, Lance Cabo 50, Cali Classic 50, Havana 50, and PCH 50, Lance Soho 50
Item Weight & Package Dimensions:
• 0.606 pounds | 3.740" (OD) x 3.202" (ID) x 1.288" (H)
People Also Bought
From Same Category
- Stock: 38
- Reward Points: 3
- Part #: 1200-1213